How do overlays compare in strength and durability to concrete?

The decorative concrete products we use are a high-performance, permanent bond to your existing surface, more than comparable to the strength of concrete. Conventional concrete is 2500-4000 psi (pounds per square inch), most decorative overlays are rated over 5000 psi. We repair any existing cracks and imperfections in the old concrete surface, then overlay the surface to conceal the repair and enhance the aesthetics. The resulting surface is stronger and more durable than in its original form.

What are my design and color options?

The overlay products support unlimited possibilities of color, texture and shape. Create the look of natural stone, slate,  brick, or tile. Color combinations, textures and design possibilities are endless and can meet any budget.

What types of surfaces can you overlay?

Overlays can be installed to almost any stable concrete surface. You can apply an overlay to cover up pitted, flaked, or otherwise deteriorated concrete surfaces without the expense and mess of demolition and disposal.

Does the surface require any particular kind of maintenance?

We recommend resealing an exterior surface every three years.  The sealer makes the surface impervious to many chemicals, UV radiation, and water. Surfaces can simply be cleaned with mild household detergents or light power washing. 

Are the surfaces slippery?

Many of the surface designs are naturally slip resistant because of their roughened texture. In locations where the surface will often be wet, such as around pool decks or hot tubs, slip-resistant additives can be added to ensure even more "grip".

Can overlays be used to correct uneven surfaces or fill in low spots?

Yes. We can apply overlay up to many inches thick to compensate for a poor quality surface provided that the base is in stable condition.

Can you apply just a thin overlay?

The overlay products we use can be applied as thin as 1/8 of an inch. Typically, we would apply an overlay this thin in applications where the bottom of a door may contact the surface or around pool copings. For most appliactions the overlays measure approximately 1/4 inch thick. Stamped applications can be as thick as 2 inches.

Can overlays be used in new construction and remodeling?

Decorative overlays are becoming the industry standard for surface rennovation and repair  but may also be specificied for new constuction and remodeling. With the virtually limitless texture and color palette available, you can achieve a custom, high-end  look at a substantial savings.

How expensive are decorative overlays and concrete resurfacing?

This question is difficult to answer on a general basis without first knowing specific  project details (overall size, shape, existing surface conditon, etc.)  Most customers are often surprised at how inexpensive decorative overlays can be compared to the cost of traditional flooring and hardscape materials.




Garage Floor Epoxy Coatings

Maryland Curbscape provides the industry's most innovative and durable epoxy flake garage floor coating systems. Whether you recently moved into a new home or live in one that is decades old, we can install a surface that will not only look fabulous, but will also be easy to clean and maintain as well as being resisitant to hot tire tracks. Installations can be completed in as little as one day with the garage ready to be put back in service within 24 hours. There are 12 standard colors available that a sure to complement your home and automobiles. Epoxy flake coatings are also perfect for workshops, basements, children's play areas, or just about any concrete surface - interior or exterior.


Acid Stained Floors
Acid stained concrete floors are a great alternative to plain gray concrete flooring. Acid stained floors can create the look of marble and have a natural mottled appearance. Many colors are available as well as the abililty to do custom engraving and geometric designs.